The Heavy-Duty Horizontal Belt Conveyor with its rugged, heavy-duty construction is ideally used for long assembly line operations, inspections, testing, sorting, and packing. Can be floor-supported or ceiling-hung.
5 Belt Widths
Reversible (with center drive)
Rugged Construction
Adjustable Floor Supports
BELT - Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed. BED - Powder painted 6-5/8 in. deep x 12 ga. formed steel slider bed. Reinforced with 3/4 in. pipe which forms sockets for guard rails. Standard 5 ft. & 10 ft. long sections bolt together with splice plates. 48 in. and 51 in. bed widths are available in 5 ft. lengths only. END DRIVE - Located on discharge end of conveyor, chain guard on left hand side. DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned and fully lagged. TAIL PULLEY - 6 in. dia. with1-3/16 in. dia. shaft at bearings, machine crowned. SNUB IDLER - Adjustable 2-1/8 in. dia. for tail end 2-1/2 in. dia. for
drive end. Pre-lubricated ball bearings. Guards included. RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP - Take-ups at tail pulley provide 4 in. of belt adjustment. BEARINGS - Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulleys. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley. MOTOR - 1/2 HP–230/460V–3 Ph.–60 Hz. Totally enclosed C-Face. BELT SPEED - Constant 65 FPM. CAPACITY - Maximum load per linear foot of conveyor 100 lbs.
