The Horizontal Trough Bed Belt
Conveyor, with built-in guard rails, is ideal for overhead conveying applications. It easily conveys boxes, cartons, cases, bags, etc., as well as loose parts.
10 Belt Widths
Reversible (with center drive)
Troughed Bed
Adjustable Floor Supports
BELT - Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed. BED - Powder painted 4 in. deep x 12 ga. formed steel slider bed with 2-1/2 in. deep guards, Standard 5 ft. & 10 ft. long sections bolt together
with splice plates. END DRIVE - Located on discharge end of conveyor, chain guard on left hand side. DRIVE PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 8 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned and fully lagged. TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned. SNUB IDLER - Adjustable 2-1/8 in. dia. pre-lubricated ball bearings. Guards included. RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP - Take-up at tail pulley provides 4 in. of belt adjustment. BEARINGS - Sealed, pre-lubricated self-aligning, ball bearings on drive and tail pulleys. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley. MOTOR - 1/2 HP–230/460V–3 Ph.–60 Hz. Totally enclosed C-Face. BELT SPEED - Constant 65 FPM. CAPACITY - Maximum load per linear foot of conveyor 75 lbs.
