The Trash Belt Conveyor is designed to handle empty cardboard boxes and paper trash.
7 Belt Widths
Center Drive
Integral Side Guards
Adjustable Floor
Supports
Underside Bed Cover
Full Length
BELT - Horizontal units: Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed. BED - 14 ga. formed steel slider bed bolted between two 7-1/2 in. deep x 12 ga. formed steel side channels with 6 in. high guards. Standard 5, 6, 7, 8, 9, and 10 ft. long sections. CENTER DRIVE - Minimum elevation of 18-1/4 in. Can be placed on any section of conveyor length with a 12 ft. chain guard located on left hand side. DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned and fully lagged. TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings. Machine crowned 13 in., 19 in., and 25 in.
BR up to 150 ft. long. 6 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned all other applications. SNUB IDLER - Adjustable 2-1/8 in. dia. with HD pre-lubricated ball bearings. RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated bearings. BEARINGS - Sealed, pre-lubricated, self-aligning, cast-iron ball bearings on drive and tail pulleys. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50, 60 or 80 roller chain to drive pulley depending on speed and length. MOTOR - 3/4 HP–230/460V–3 Ph.–60 Hz. Totally enclosed C-Face. BELT SPEED - Constant 65 FPM. CAPACITY - Maximum load per linear foot of conveyor 10 lbs. DUST PANS - Solid 16 ga. underside dust covers held in place by 1/4 turn screws for easy removal. MANUAL UNDERSIDE TAKE–UP - Provides 16 in. of belt take-up up to 150 ft.. PNEUMATIC UNDERSIDE TAKE–UP - Provides 60 in. of belt take-up for conveyors over 150 ft.
