The Heavy-Duty Accumulating Conveyor (Electronically Controlled) is a flat belt driven live roller
conveyor designed for use where zero-pressure accumulation, low elevation (12”) and close roller centers are required.
Zero-Pressure
Accumulation
Compact Drive
Low Elevation
Adjustable Floor
Supports
Electronic Photo Eye
Control
BELT - 14 in. black PVC 120- CBS (cover both sides). Clipper unibar lacing. BED - Roller bed with 2-1/2 in. dia. x 11 ga. unplated tread rollers spaced every 3 in. and 1.9 in. dia. x 16
ga. unplated pressure rollers spaced every 6 in. Mounted in 7-1/2 in. x 10 ga. powder painted formed
steel channel frame. Bolted together with butt coupling. END DRIVE - Located on infeed end of conveyor. DRIVE PULLEY - 8 in. dia. with 1-7/16 in. dia. shaft at bearings, machine crowned and fully lagged. TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft, machine crowned. SNUB IDLER - Adjustable 2-5/8 in. dia. at drive pulley, 2-1/8 in. dia. at tail pulley. Pre-lubricated ball bearings. TAKE-UP - 4 in. dia. with 1 in. dia. at shaft bearings, machine crowned. SNUB IDLER - Adjustable 2-1/2 in. dia. pre-lubricated ball bearings. RETURN IDLER - 2-1/8 in. dia. at drive end, all others 1.9 dia. unplated. Pre-lubricated ball bearings. TAKE-UP - Take-up at tail pulley. BEARINGS - Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulley. Sealed, pre-lubricated ball bearings in tread and pressure rollers. ACCUMULATION ZONES - 60 in. long. TREAD ROLLER BRAKE - Friction type brake stops tread rollers to prevent coasting of product in accumulation zone. ACCUMULATION MODULE - Located in each zone (Diffuse). Power supply must be located in the center - maximum 50 zones per power supply. UL and CSA approved. AIR REQUIREMENTS - Recommended working pressure 40
P.S.I. Free air consumption at 40 P.S.I.– .028 cu. ft. per sensor actuation. FILTER REGULATOR - Supplied for main air supply line. (3/8 in. NPT port). SPEED REDUCTION - Sealed Helical–Bevel C-Face gear reducer. No.60 roller chain to drive pulley. MOTOR - 3/4 HP–230/460V–3 PH. 60 Hz. Totally enclosed C-Face. CONVEYING SPEED - Constant 30 FPM. CAPACITY - Maximum load per linear foot of conveyor 1000 lbs. Maximum unit load 4000 lbs. POWER SUPPLY - 27 VDC, 4 amp Power supply located near center of conveyor. Maximum of 50 zones per power supply (25 each side of power supply). Requires 120 VAC input.
