The Drag Chain Conveyor is a drag chain conveyor designed to handle pallets. Pallets are
accumulated with “Zero-Back Pressure,” reducing the possibility of collision that may result in product damage.
Accumulation System
11 Widths
Modular Assembly
Adjustable Floor
Supports
Electronic Photo Eye
CHAIN - C-2060H double pitch conveyor chain (straight sidebar). CHAIN GUIDE - UHMW polyethylene. FRAME - 6 in. x 7 ga. powder painted formed steel angle with 1-1/2 in. x 3/16 wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR - 1-1/2 HP – 230/460V– 3 PH. 60 HZ. gearmotor, located underneath in
5 ft. long module. ACCUMULATION ZONES - 60 in. long. DRIVE SPROCKETS - Hardened 2060BTB15H with 1-3/8 in. dia. steel shaft. BEARINGS - Sealed, pre-lubricated, self aligning, ball bearings on drive. CONVEYING SPEED - 30 FPM. CAPACITY - 6000 lbs. maximum at 30 FPM (1-1/2 HP maximum). ACCUMULATION MODULE - Located in each zone (Diffuse). UL and CSA approved. AIR REQUIREMENTS - Recommended working pressure 60 P.S.I. Free air consumption at 75 P.S.I. - .50 cu. ft. per actuation for 18” & 21” strand centers - 1.0 cu. ft. per actuation for 24 - 28 strand centers. FILTER REGULATOR - Supplied for main air supply line (1/2 in. NPT port). POWER SUPPLY - 27 VDC, 4 amp Power Supply located near center of conveyor. Maximum of 50 zones per power supply (25 each side of power supply). Requires 120 VAC input.
