The Horizontal Wire Mesh Belt Conveyor with wire belt can carry hot or cold parts from ovens or freezers. Can be used in drying operations.
3 Belt Widths
Wire Mesh Belt
Adjustable Floor
Supports
BELT - 1/2 in. x 1 in. flat galvanized wire mesh belt. Maximum product temperature 350°F. BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-5/8 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates. END DRIVE - Located on discharge end of conveyor, chain guard on left hand side. CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide alignment of bed rollers to insure correct belt tracking. DRIVE SPROCKETS - 6 in. pitch dia. multiple cast iron sprockets with 1-3/16 in. dia. shaft 6 in. centers. TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings. Sprocket at each end. SNUB IDLER - Adjustable 2-1/8 in. dia. pre-lubricated ball bearings. RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP - Take-up at tail pulley that provides 4 in. of belt adjustment. BEARINGS - Sealed, pre-lubricated, self-aligning ball bearings on drive and tail shafts. Pre-lubricated ball bearings in tread rollers. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive sprocket. MOTOR - 1/2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face. BELT SPEED - Constant 65 FPM. CAPACITY - Maximum load per linear foot of conveyor 75 lbs.
