Design - Engineering - Installation - Maintenance - Service

Product Catalog » Accumulation Conveyor - Minimum Pressure

Light-Duty Curve Conveyor (Minimum Back Pressure)

The Light-Duty Curve Conveyor (V-Belt) is a light-duty live roller curve that provides a positive drive for negotiating 90°, 60°, 45°, or 30° turns. It may be self-powered or can be slave driven.

4 Bed Widths
Adjustable Floor Supports
BED - Roller bed with 1-3/8 in. dia. roller x 18 ga. galvanized tube (12 in.–18 in. OAW) and 2-1/2 in. dia. tapered to 1-11/16 in. dia. roller x 16 ga. galvanized tube and 1.9 in. dia. straight rollers x 16 ga. galvanized tube (24 in. OAW). Mounted in 6-1/2 in. x 12 ga powder painted formed steel channel frame.
END DRIVE - Mounted underneath bed section.
DRIVING BELT - Endless B-section with industrial grade V-Belt.
PRESSURE SHEAVES - 2-1/2 in. dia. with 3/8 in. bore.
IDLER SHEAVE - 4 in. dia. x 5/8 in. bore V type and/or 5-1/2 in. dia. x 5/8 in. bore flat type.
TAKE-UP - Take-up provided to maintain proper V-belt tension. Includes 4-3/8 in. dia. x 5/8 in. bore
V type take-up sheave.
BEARINGS - Sealed, pre-lubricated, self aligning ball bearings with eccentric lock collar on flange and
pillow block bearings. Pre-lubricated ball bearings in tread rollers. 
SPEED REDUCTION - Sealed worm gear reducer, driven by V-belt. No. 50 roller chain to drive sheave.
MOTOR - 1/2 HP–230/460V–3 PH. 60 Hz. Totally enclosed.
CAPACITY - 150 lbs. total distributed live load.