Design - Engineering - Installation - Maintenance - Service
866-403-5232

Product Catalog » Accumulation Conveyor - Minimum Pressure

Medium-Duty Horizontal Power Conveyor (Minimum Back Pressure)


The Medium-Duty Horizontal Power Conveyor (V-Belt) is the simplest method ever devised for accumulating cartons, boxes, etc. Basic design eliminates complicated adjustments and allows a minimum of 2% back pressure.


4 Bed Widths
2% Minimum Back Pressure
Finger Tip Snub Roller Adjustments - No Tools Needed
Reversible
Adjustable Floor Supports
BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. and 1.9 in. dia. pressure rollers x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt couplings.
CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. 
DRIVE - Mounted underneath, placed near center of conveyor.
DRIVE BELT - Endless B-section aramid core V-Belt drives each section of conveyor.
RETURN TAKE-UP SHEAVE - 3-1/4 in. dia. x 1/2 bore flat idler has seven position adjustments
to maintain proper V-belt tension.
BEARINGS - Tread & pressure rollers have pre-lubricated ball bearings. Flange and pillow block bearings are sealed, pre-lubricated with eccentric lock collar. 
SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive shaft..
MOTOR - 1/2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face.
CONVEYING SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of conveyor 150 lbs.