The Medium-Duty Spur Conveyor (V-Belt) is used in diverging or converging applications. It may be self-powered or can be slave driven.
12 Bed Widths
Right or Left Hand Units Available
Adjustable Floor Supports
BED - Roller bed with 2-1/2 in. dia. tapered to 1-11/16 in. dia. roller x 16 ga. galvanized and 1.9 in. dia. roller x 16 ga. galvanized tube. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame. END DRIVE - Mounted underneath bed section. DRIVING BELT - Endless B-section with industrial grade V-Belt. PRESSURE SHEAVES - 2-1/2 in. dia. with 3/8 in. bore. IDLER SHEAVE - 4 in. dia. x 5/8 in. bore V type or 5-1/2 in. dia. x 5/8 in. bore flat type. TAKE-UP - Take-up provided to maintain proper V-belt tension. Includes 4-3/8 in. dia. x 5/8 in. V type take-up sheave. BEARINGS - Tread rollers have pre-lubricated ball bearings. Flange and pillow block bearings are sealed, pre-lubricated with eccentric lock collar. BUTT COUPLINGS - Standard. SPEED REDUCTION - Sealed worm gear reducer driven by V-belt. No. 50 roller chain to drive sheave. MOTOR - 1/2 HP–230/460V–3 PH. 60 Hz. Totally enclosed. CONVEYING SPEED - Constant 65 FPM. CAPACITY - 500 lbs. total distributed live load.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.