The Medium-Duty Powered Roller Conveyor uses a series of 24 VDC motorized rollers to drive the tread rollers, eliminating the need for drive belts, chains, or line shafts. Quiet operation, ease of maintenance, ease of installation, and modularity are just some of it's advantages.
Electronic Photo Eye
BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube and ABEC-1 precision bearings spaced every 3 in. Mounted set-low in 6-1/2 in x 12 ga. powder painted formed steel channel frame bolted together with splice plates. DRIVE ROLLER - 1.9 in. dia., 24 VDC motorized roller. One in each zone of conveyor. SLAVE O-RINGS - 3/16 in. dia. polyurethane o-rings slave-drive zone idler rollers from motorized roller. ACCUMULATION ZONES - 24 in. long electrically controlled. ACCUMULATION MODULE - Located in each zone (retro-reflective). UL and CSA approved. ROLLER CONTROLLER - Controls and protects motorized roller. One located in each zone. POWER SUPPLY - 40 amp DC power supply, 28 volt fixed output. Maximum of 40 zones per power supply. 120 VAC, 17 amp input. Mounted near center of conveyor. CONVEYING SPEED - 65 FPM constant. CAPACITY - Maximum load 50 lbs. per zone.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.