The Heavy-Duty Accumulating Conveyor (Mechanically Controlled) is a belt driven live roller conveyor designed for use where zero-pressure accumulation, low elevation (12") and close roller centers are required. The conveyor is also available in non-accumulating form.
Adjustable Floor Supports
BELT - 14 in. black PVC 120- CBS (cover both sides). Clipper unibar lacing. BED - Roller bed with 2-1/2 in. dia. x 11 ga. unplated tread rollers spaced every 3 in. and 1.9 in. dia. x 16 ga. unplated pressure rollers spaced every 6 in. Mounted in 7-1/2 in. x 10 ga. powder painted formed steel channel frame. Bolted together with butt couplings. END DRIVE - Located on infeed end of conveyor. DRIVE PULLEY - 8 in. dia. with 1-7/16 in. dia. shaft at bearings. Machine crowned and fully lagged. TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft, machine crowned. SNUB IDLER - Adjustable 2-5/8 in. dia. at drive pulley, 2-1/8 in. dia. at tail pulley. Pre-lubricated ball bearings. RETURN IDLER - 2-1/8 in. dia. at drive end, all others 1.9 dia. unplated. Pre-lubricated ball bearings. TAKE-UP - Take-up at tail pulley. BEARINGS - Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulley. Sealed, pre-lubricated ball bearings in tread and pressure rollers. ACCUMULATION ZONES - 60 in. long air controlled. SENSING ROLLER - 2-1/8 in. dia. x 1/8 in. wall unplated. (One roller in each accumulation zone.) TREAD ROLLER BRAKE - Friction type brake stops tread rollers to prevent coasting of product in accumulation zone. AIR REQUIREMENTS - Recommended working pressure 40 P.S.I. Free air consumption at 40 P.S.I.– .028 cu. ft. per sensor actuation. FILTER REGULATOR - Supplied for main air supply line. (3/8 in. NPT port). SPEED REDUCTION - Sealed Helical–Bevel C-Face gear reducer. #60 roller chain to drive pulley. MOTOR - 3/4 HP–230/460V–3 PH. 60 Hz. Totally enclosed C-Face. ELECTRICAL CONTROLS - 110 VAC single phase, 60 Hz. electric solenoid air valve in discharge zone. CONVEYING SPEED - Constant 30 FPM. CAPACITY - Maximum load per linear foot of conveyor 1000 lbs. Maximum unit load 4000 lbs. Minimum load 10 lbs. per foot with minimum unit load of 20 lbs.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.