The Heavy-Duty Accumulating Conveyor (Electronic Photo Eye) is a chain driven live roller conveyor designed to handle loads such as pallets, drums, etc. Items are accumulated with "Zero-Back Pressure," reducing the possibility of collisions that may result in product damage.
Chain Driven Rollers
4 ga. Formed Steel Frames
Adjustable Floor Supports
BED - Roller bed with 2-1/2 in. dia. x 11 ga. unplated rollers spaced every 4 in. or 6 in. Tread rollers mounted in 4 in. x 4 ga. powder painted formed steel channel frame bolted together with butt coupling. DRIVE - Mounted underneath, placed near center of conveyor. DRIVE CHAIN - No. 40 roller-to-roller. No. 60 main drive chain. CHAIN GUARD - Formed steel guards totally enclose drive chains. ACCUMULATION ZONES - 60 in. long. BEARINGS - Sealed, pre-lubricated ball bearings. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. MOTOR - 3/4 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face. CONVEYING SPEED - Constant 30 FPM. CAPACITY - Maximum load per linear foot of conveyor1000 lbs. Maximum unit load 3000 lbs. ACCUMULATION MODULE - Located in each zone (Diffuse). UL and CSA approved. AIR REQUIREMENTS - Recommended working pressure 60 P.S.I. FILTER REGULATOR - Supplied for main air supply line. (3/8 in. NPT port). POWER SUPPLY - 27 VDC, 4 amp power supply located near center of conveyor. Maximum of 50 zones per power supply (25 each side of power supply). Requires 120 VAC input.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.