The Heavy-Duty Accumulating Conveyor (Mechanical Clutch) is a chain driven live roller conveyor designed to handle loads such as pallets, drums, etc. Items are accumulated with "Zero-Back Pressure," reducing the possibility of collisions that may result in product damage.
Chain Driven Rollers
4 ga. Formed Steel Frames
Adjustable Floor Supports
BED - Roller bed with 2-1/2 in. dia. x 11 ga. unplated rollers spaced every 4 in. or 6 in. Tread rollers mounted in 4 in. x 4 ga. powder painted formed steel channel frame bolted together with butt couplings. DRIVE - Mounted underneath, placed near center of conveyor. DRIVE CHAIN - No. 40 roller-to-roller. No. 60 main drive chain. CHAIN GUARD - Formed steel guards totally enclose drive chains. ACCUMULATION ZONES - 60 in. long. BEARINGS - Sealed, pre-lubricated ball bearings. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. MOTOR - 3/4 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face. ELECTRICAL CONTROLS - 110 VAC, single phase, 60 Hz. electric solenoid in discharge zone. Limit switch supplied to kill zone. CONVEYING SPEED - Constant 30 FPM. CAPACITY - Maximum load per linear foot of conveyor1000 lbs. Maximum unit load 3000 lbs.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.