Design - Engineering - Installation - Maintenance - Service
866-403-5232

Product Catalog » Portable Conveyors

Portable Parts Conveyor


The Portable Parts Conveyor can be used as a portable or permanent parts conveyor. Side guards and cleated belt easily catch small stampings, plastic parts, etc., and carry them to hoppers or drums. Flapper guard prevents parts from falling through conveyor.

8 Belt Widths
Overhead Drive
Tough Cleated Belt
Portable or Permanent
Formed Edge Guard Rails
BELT - 3- ply black Nitrile with 1-1/2 in. high molded cleats on 12 in. centers. Clipper unibar lacing.
BED - 6-5/8 in. deep x 12 ga powder painted formed steel slider bed. 3-1/2 in. high vertical sides with rolled edge. Standard sections are 4 ft., 6 ft., 8 ft., 10 ft., and 12 ft. long. Longer bed sections are bolted together with splice plates and joint support angles.
PORTABLE BASE SUPPORT - Tubular steel support mounted on 4 in. dia. steel wheels. Adjustable to control conveyor height at top and bottom. Adjustment height can be locked in place with lever.
OVERHEAD END DRIVE - Motor reducer unit mounted 9-1/2 in. above belt (chain guard RH side).
DRIVE PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings. Machine crowned and fully lagged.
BELT RETURN - 4 in. dia. with 1 in. dia. shaft at bearings. Machine crowned.
TAKE-UP - Take-up provided at tail pulley. Provides 4 in. of belt take-up.
BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys.
SPEED REDUCTION - Sealed worm gear "C" face speed reducer. No. 50 roller chain to drive pulley.
MOTOR - 1/2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face.
BELT SPEED - Constant 65 FPM.
CAPACITY - 300 lbs. total distributed load at 65 FPM.