Design - Engineering - Installation - Maintenance - Service

Product Catalog » Portable Conveyors

Piano Hinge Portable Parts Conveyor

The Piano Hinge Parts Conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to "Z" type units.

5 Belt Widths
Piano Hinge Belt
Heavy-duty PCHS Type
Adjustable Floor Supports
OVERHEAD END DRIVE - Located on discharge end of conveyor. Chain guard located on right hand side.
BELT - Piano Hinge metal belt with 12 ga. plain bottom aprons. 2-1/2 in. pitch chain with 1-1/2 in. dia. hardened rollers with 7/16 in. dia. hinge axle. 1-1/2 in. high x 10 ga. continuous off-set side wing links.
BED - 8-5/8 in. deep x 10 ga. powder painted, formed steel channel. Modular bed sections bolt together with butt couplings. 45° standard incline section.
BELT GUIDES - Steel angle mounted inside bed for tracking belt.
DRIVE SPROCKETS - 5 in. pitch dia. with 1-7/16 in. dia. shaft, 6 tooth.
TAKE-UP SPROCKETS - 5 in. pitch dia. with 1-7/16 in. dia. shaft, 6 tooth.
TAKE-UP - Take-up provided to insure proper belt tension.
BEARINGS - Sealed, re-lube bearings at drive and take-up.
SPEED REDUCTION - Sealed worm gear speed reducer driven by V-belt. No. 60 roller chain to drive sprockets.
MOTOR - 3/4 HP -230/460V-3 Ph. 60 Hz. Totally enclosed.
BELT SPEED - Constant 30 FPM.
CAPACITY - 35 lbs. belt capacity per linear foot of conveyor.