The Medium-Duty Chain Driven Roller Conveyor is designed to be used for conveying higher load capacities such as loaded pallets and drums.
Chain driven rollers make it ideal for conveying oily parts in bottling and steel industries.
11 Bed Widths
Chain Driven Rollers
BED - Roller bed with 2-1/2 in. dia. x 11 ga. unplated tread rollers spaced every 4 in. with No. 40 roller chain; 3-3/4 in., 5 in., 7-1/2 in., or 10 in. with No. 50 roller chain. No. 60 roller chain used on 3-3/4 in., 6 in., 7-1/2 in. and 12 in. roller centers only. Tread rollers mounted in 4 in. x 4 ga. powder painted formed steel channel frame and bolted together with butt couplings. CENTER DRIVE - Can be placed in any section of conveyor length. Chain guard located on left hand side. DRIVE CHAIN - No. 40, 50 or 60 roller chain. CHAIN GUARD - Formed steel, upper and lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains. BEARINGS - Sealed, pre-lubricated ball bearings. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. MOTOR - 3/4 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face. CONVEYING SPEED - Constant 30 FPM. CAPACITY - Maximum load per linear foot of conveyor 300 lbs., with supports on 10 ft. centers; 1000 lbs. with supports on 5 ft. centers.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.