The Heavy-Duty Chain Driven Roller Conveyor
(Hex Shaft Roll-to-Roll Type) is a heavy-duty, chain driven roller conveyor. Its tough, rugged design allows it to provide service under demanding manufacturing operations. Use this conveyor for conveying heavy pallets and drums.
15 Bed Widths
Chain Driven Rollers
Adjustable Floor Supports
BED - Roller bed with 3-1/2 in. x .300 in. wall unplated tread rollers with 1-1/16 in hex shaft spaced every 6 in. or 12 in. Mounted in 5 ft. long powder painted structural steel channel frame bolted together with butt couplings. CENTER DRIVE - Top side mounted drive, mounted to 5 ft. long section near center of conveyor. Chain guard located on left hand side. DRIVE CHAIN - No. 60 roller chain. CHAIN GUARD - Formed steel upper & lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains. BEARINGS - Sealed, pre-lubricated ball bearings. SPEED REDUCTION - Heavy-duty sealed worm gear C-Face speed reducer. No. 80 roller chain to drive shaft. MOTOR - 2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face. FLEXIDINE CLUTCH - Mounted between motor and reducer provide soft start and intermittent overload protection. CONVEYING SPEED - Constant 30 FPM. CAPACITY - Maximum load per linear foot of conveyor 2000 lbs. with supports on 5 ft. centers.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.