Design - Engineering - Installation - Maintenance - Service

Product Catalog » Accessories

Pivoting Divert Sorter

   The Pivoting Divert Sorter is a precisely timed flat faced, pivot arm diverter for use with the belt conveyor to deflect cartons across the conveyor belt. Its unique cylinder arrangement allows it to divert cartons at very high rates across the conveyor belt onto the divert chute.
Right Hand or Left Hand Diverts Available
Up to 60 Cartons Per Minute
PAINT - Powder painted black only with yellow guards.
DIVERT ARM - Painted steel channel with 48 in. long x 15 in. wide x 3/16 in. thick aluminum face.
CAPACITY - 1 lb. minimum carton weight, 50 lb. maximum carton weight, 36 in. maximum carton length, 1 in. minimum carton height.
CYCLE RATE - Up to 60 cycles per minute.
AIR VALVE - 120 volt AC single solenoid air valve.
AIR FILTER REGULATOR - Supplied with safety shut off valve, 1/2 inch NPT inlet port.
AIR CYLINDER - Two 2-1/2 in. bore x 4 in. stroke.
AIR REQUIREMENTS - 80 PSI working pressure, free air consumption at 80 psi-0.14 cubic feet per cycle. Note: Include safety factor when calculating compressor size. (1-1/4 in. minimum air supply line recommended).