Design - Engineering - Installation - Maintenance - Service

Product Catalog » Accessories

Power Rotated Turntable

   View The Product Spotlight
The Power Rotated Turntable is used to rotate products up to 360 degrees. The turntable is powered by a shaft mounted gearmotor, complete with variable speed controller for soft start/stop. It has proximity switches mounted on the base to sense position and control rotation of the product. Turntable speed is 3 Revolutions per minute with a 1 HP 460/3/60 gearmotor. An 8-wire collector ring allows unlimited rotation of the turntable. Powered transition rollers, mounted on the apron of the turntable deck, helps move the product onto and off of the turntable.
The CRR section has a top side mounted drive contained within the turning radius of the turntable. Standard speed is 30 FPM, with a 1/2 HP, 460/3/60 gearmotor. The tread rollers are 2-5/8 inch diameter with 7 gauge wall on 4 inch roller centers and have 2-5/8 in. dia. x .219 wall drive rollers with heavy duty "BCA" type bearings. Also available: gravity transition rollers; external transition roller sections (mounted to mating conveyors to fill in gap created by radius of turntable). Minimum elevation is 16 inches.