The Horizontal Belt Conveyor (Roller Bed) is designed to move heavier loads. The roller bed design reduces belt friction and provides greater capacity. Applications include: assembly, inspection and packing operations.
14 Belt Widths
Moves Heavier Loads
Adjustable Floor Supports
BELT - Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed. BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates. CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. CENTER DRIVE - Minimum elevation–19-1/2 in. Drive can be placed on any section of conveyor. Chain guard located on left hand side. DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned and fully lagged. TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned. SNUB IDLER - Adjustable 2-1/8 in. dia. pre-lubricated ball bearings. Guards included. RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP - Take-up in center drive provides 16 in. of belt adjustment. BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys. Pre-lubricated ball bearings in tread rollers. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley. MOTOR - 1/2 HP–230/460V–3 Ph.–60 Hz. Totally enclosed C-Face. BELT SPEED - Constant 65 FPM. CAPACITY - Maximum load per linear foot of conveyor 225 lbs.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.