The Medium-Duty Live Roller Conveyor (Spool) is a general transport conveyor with the capabilities of accumulating products with back pressure. Quiet operation, versatile design, easy installation and maintenance make it a valuable component in operations requiring high performance with minimal downtime.
12 Bed Widths
Adjustable Floor Supports
BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. Mounted in 9-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates. CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. DRIVE - Mounted underneath, placed near center of conveyor. Chain guard located on left hand side. DRIVE SHAFT - 1 in. dia. steel shaft extends full length of conveyor. Chain coupling at bed joints. Located on left hand side. DRIVE SPOOLS - 2 in. dia. Delrin spool held in place on drive shaft with spool spacers. DRIVE GUARD - Underside of drive shaft with spools and drive o-rings guarded full length of conveyor. DRIVE O-RING - 3/16 in. dia. polyurethane o-ring from drive spool to tread rollers. BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings with eccentric lock collar on drive shaft. Pre-lubricated ball bearings in tread rollers. SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive shaft. MOTOR - 1/2 HP–230/460V–3 Ph. 60 Hz Totally enclosed C-Face. CONVEYING SPEED - Constant 65 FPM. CAPACITY - Maximum load per powered roller–15 lbs.
2047 Hwy 96 | Burns, TN 37029 | Ph: 866-403-5232
| Located in Middle Tennessee just 25 minutes West of Nashville, TN
| Serving the following states. Tennessee, North Carolina, South
Carolina, Florida, Georgia, Alabama, Illinois, Indiana, Kentucky,
Louisiana, Oklahoma, Arkansas, Texas.