|
|
|
|
|
|
|
The Horizontal Trough Bed Belt
Conveyor, with built-in guard rails, is ideal for overhead conveying applications. It easily conveys boxes, cartons, cases, bags, etc., as well as loose parts.
 |
10 Belt Widths |
|
Reversible (with center drive) |
|
Troughed Bed |
|
Adjustable Floor Supports |
|
BELT - Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed.
BED - Powder painted 4 in. deep x 12 ga. formed steel slider bed with 2-1/2 in. deep guards, Standard 5 ft. & 10 ft. long sections bolt together
with splice plates.
END DRIVE - Located on discharge end of conveyor, chain guard on left hand side.
DRIVE PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 8 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned and fully lagged.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned.
SNUB IDLER - Adjustable 2-1/8 in. dia. pre-lubricated ball bearings. Guards included.
RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings.
TAKE-UP - Take-up at tail pulley provides 4 in. of belt adjustment.
BEARINGS - Sealed, pre-lubricated self-aligning, ball bearings on drive and tail pulleys.
SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.
MOTOR - 1/2 HP–230/460V–3 Ph.–60 Hz. Totally enclosed C-Face.
BELT SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of conveyor 75 lbs.
|
|