|
|
|
|
|
|
|
The Belt Curve Conveyor, provides a positive flow of products by means of a belt, that is driven by tapered pulleys. Conveyor is versatile in that it can transport a wide variety of products. Available in 45°,60°,
90°, and 180° turns.
 |
20 Belt Widths |
|
Endless Splice Belt |
|
Adjustable Floor
Supports |
|
BELT - Black Monofilament, PVC top with urethane guide strip.
FRAME - 8-3/8 in. inside, 10-1/2 in. outside. 2” x 2” x 3/16” Structural Steel All Welded Construction.
PULLEYS - Tapered with 1-7/16 in. dia. shaft through bearings. Adjustable to control belt tension.
BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulley. Re-lube type.
MOTOR - 3/4 HP Shaft Mounted Right Angle Gearmotor 230/460-3Ph. 60 Hz
BELT SPEED - Constant 65 FPM at center line of conveying surface.
CAPACITY - Maximum load per linear foot (measured at center line of conveying surface) 40 lbs.
|
|