|
|
|
|
|
|
|
The Horizontal Belt Conveyor (Roller Bed) is designed to move heavier loads. The roller bed design reduces belt
friction and provides greater capacity. Applications include: assembly, inspection and packing operations.
 |
14 Belt Widths |
|
System Ends |
|
Reversible |
|
Pop-Out Roller |
|
Moves Heavier Loads |
|
Adjustable Floor
Supports |
|
Center Drive |
|
|
|
BELT - Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed.
BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates.
CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking.
CENTER DRIVE - Minimum elevation–19-1/2 in. Drive can be placed on any section of conveyor. Chain guard located on left hand side.
DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned and fully lagged.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings. Machine crowned.
SNUB IDLER - Adjustable 2-1/8 in. dia. pre-lubricated ball bearings. Guards included.
RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings.
TAKE-UP - Take-up in center drive provides 16 in. of belt adjustment.
BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys. Pre-lubricated ball bearings in tread rollers.
SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.
MOTOR - 1/2 HP–230/460V–3 Ph.–60 Hz. Totally enclosed C-Face.
BELT SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of conveyor 225 lbs.
|
|