|
|
|
|
|
|
|
The Light-Duty Horizontal Power Conveyor (Minimum Back Pressure) is the simplest method ever devised for accumulating cartons, boxes, etc. Basic design eliminates complicated adjustments and allows a minimum of 2% back pressure.
 |
4 Bed Widths |
|
2% Minimum Back
Pressure |
|
Finger Tip Snub Roller
Adjustment - No Tools Needed |
|
Reversible |
|
Adjustable Floor
Supports |
|
BED - Roller bed with 1-3/8 in. dia. roller x 18 ga. galvanized tube, spaced every 3 in. and 1-3/8 in. dia. pressure roller x 18 ga. galvanized tube, spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt couplings.
CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. Supplied on every other section 30 ft. lengths and over.
DRIVE - Mounted underneath, placed near center of conveyor.
DRIVE BELT - Endless B-section aramid core V-Belt drives each section of conveyor.
RETURN TAKE-UP SHEAVE - 3-1/4 in. dia. x 1/2 in. bore flat idler has seven position adjustments to maintain proper V-belt tension.
BEARINGS - Sealed, pre-lubricated ball bearings with eccentric lock collar on flange and pillow block bearings. Pre-lubricated ball bearings in tread & pressure rollers.
SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive shaft.
MOTOR - 1/2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face.
CONVEYING SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of conveyor 50 lbs.
|
|