|
|
|
|
|
|
|
The Medium-Duty Horizontal Power Conveyor (Flat Belt)
accumulates cartons, boxes, etc. Basic design eliminates complicated adjustments and allows a minimum of 2% Back Pressure.
 |
12 Bed Widths |
|
2% Minimum Back
Pressure |
|
Finger Tip Snub Roller
Adjustment, Both Sides |
|
Reversible |
|
Center Drive |
|
Adjustable Floor
Supports |
|
BELT - Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed.
BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. and 1.9 in. dia.
pressure roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt couplings.
CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking.
CENTER DRIVE - Can be placed in any section of conveyor length.
DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings,machine crowned.
SNUB IDLER - Adjustable 2-1/8 in dia. pre-lubricated ball bearings.
RETURN IDLER - Adjustable 1.9 in dia. pre-lubricated ball bearings.
TAKE-UP - Take-up in center drive provides 16 in. of belt adjustment.
BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive, tail, and take-up pulleys.
Pre-lubricated ball bearings in tread and pressure rollers.
SPEED REDUCTION - Sealed worm C-Face gear reducer. No. 50 roller chain to drive sheave.
MOTOR - 1/2 HP–230/460V–3 PH. 60 Hz. Totally enclosed C-Face.
CONVEYING SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of conveyor 200 lbs.
|
|