|
|
|
|
|
|
|
The Heavy-Duty Chain Driven Roller Conveyor
(Hex Shaft Roll-to-Roll Type) is a heavy-duty, chain driven roller conveyor. Its tough, rugged design allows it to provide service under demanding manufacturing operations. Use this conveyor for conveying heavy pallets and drums.
 |
15 Bed Widths |
|
Center Drive |
|
Reversible |
|
Chain Driven Rollers |
|
Adjustable Floor Supports |
|
BED - Roller bed with 3-1/2 in. x .300 in. wall unplated tread rollers with 1-1/16 in hex shaft spaced every 6 in. or 12 in. Mounted in 5 ft. long powder painted structural steel channel frame bolted together with butt couplings.
CENTER DRIVE - Top side mounted drive, mounted to 5 ft. long section near center of conveyor. Chain guard located on left hand side.
DRIVE CHAIN - No. 60 roller chain.
CHAIN GUARD - Formed steel upper & lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains.
BEARINGS - Sealed, pre-lubricated ball bearings.
SPEED REDUCTION - Heavy-duty sealed worm gear C-Face speed reducer. No. 80 roller chain to drive shaft.
MOTOR - 2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face.
FLEXIDINE CLUTCH - Mounted between motor and reducer provide soft start and intermittent overload protection.
CONVEYING SPEED - Constant 30 FPM.
CAPACITY - Maximum load per linear foot of conveyor 2000 lbs. with supports on 5 ft. centers.
|
|