|
|
|
|
|
|
|
The Low Profile Portable Parts Conveyor can be easily positioned under punch presses
and extruding machines to catch small steel, plastics, or aluminum stampings, etc.
 |
Belt with 1" High
Metal Cleats |
|
Underside Drive |
|
5/8" Height
Vertical Sides Above Cleat |
|
Enclosed Box
Construction |
|
Belt Scraper |
|
Adjustable Portable
Supports |
|
END DRIVE - Located on discharge end of conveyor. Chain guard located on left hand side.
BELT - Black Trackmate 533 COS-PVC (cover one side) with 1” high steel angle cleats on 12” centers.
Clipper unibar lacing.
BED - 7-1/4 in. x 12 ga. powder painted steel, formed side channel with bolted in slider bed which provides 1 in. high sides above belt.
BELT SCRAPER - Mounted inside conveyor bed section to clean underside of return belt.
PORTABLE BASE SUPPORT - Undercarriage is adjustable from 4 in. to 30 in. with 6 in. dia. rubber wheels.
DRIVE PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned.
BELT RETURN - Belt cleats slide on flat metal return guide.
TAKE-UP - Take-up at tail pulley provides 6 in. of belt adjustment.
BEARINGS - Sealed, pre-lubricated ball bearings on drive and tail pulleys.
SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No 50. roller chain to drive pulley
MOTOR - 1/2 HP–230/460V–3 Ph. 60 Hz. Totally enclosed C-Face.
BELT SPEED - Constant 25 FPM maximum.
CAPACITY - 100 lbs. total distributed live load.
|
|