30° Plow

American Conveyor Group, Inc.
Call: 866-403-5232  |  www.acgconveyors.com
   30° Plows are used to divert product from main conveyor line to spur line. It mounts to underside of bed on Powered belt or Live Roller type conveyors.

Manual & Pneumatic
2 in. x 2 in. x 14 ga. plow arm
30° plow angle
 
Pneumatic Only
Air cylinder–2 in. bore double acting 6 in. stroke (10 in. to 18 in. OAW conveyors),
10 in. stroke (20 in. to 42 in. OAW conveyors)
Air Requirements–Minimum pressure 60 P.S.I.–Maximum 100 P.S.I. free air
consumption per cycle–6 in. stroke at 60 P.S.I. (.105 cu. ft.),
at 100 P.S.I. (.162 cu. ft.)–10 in. stroke at 60 P.S.I. (.176 cu. ft.),
at 100 P.S.I. (.270 cu. ft.).
Valve–Single solenoid 4-way valve–1/4 in.–20NPT valve ports. Electrical requirements: 120V.–1 Ph.–60 Hz.–current draw, .09 amps.