Spring Balanced Gate

American Conveyor Group, Inc.
Call: 866-403-5232  |  www.acgconveyors.com

Photo shown is Spring Balanced Gate for 1.9 in. dia. roller conveyor.		 Spring Balanced Gates can be used with several types of gravity wheel and roller conveyor. Gates provide a passageway for personnel, lift trucks, and other equipment. Tension springs are easily adjusted to provide minimum weight lift.

4 widths (12 in. to 24 in. OAW) • 3 ft., 4 ft., & 5 ft. lengths
Steel or aluminum, skatewheels or rollers
2-1/2 in. x 1 in. channels–12 ga. galvanized steel or .125 in. aluminum
HD compression springs
12 widths (13 in. to 39 in. BR)
3 ft., 4 ft., & 5 ft. lengths (1.9 in. & 2.0 in.), 3 ft. & 4 ft. lengths (2.5 in.)
1.9 in. galv., unplated or aluminum, or 2.0 in. unplated rollers–2.5 in. unplated rollers
1.9 in. & 2.0 in. roller: 10 ga. powder painted steel channels, 3-1/2 in. x 1-1/2 in. (set high) or 4-1/2 in. x 1-1/2 in. (set low) – 2.5 in. roller: 4 in. x 1-5/8 in. x 4 ga. powder painted steel
channels (set high or set low)
Safety gate latch

NOTE: Maximum width and length determined by roller centers and type of roller. Inquire.