 |
Precision indexing tolerance to register a part to within +/- .015" without sensors |
|
High speeds up to 2000 fpm with ramp up/down capacity |
|
Custom molded cleats to integrate perfectly with your part or application |
|
Cleats are high frequency welded to the belt |
|
Positive, non-slip timing pulleys |
|
Self-aligning drive bearings with seals |
|
Bearings can be lubricated rapidly, without drive removal |
|
Stepper motors and Servo drives are PLC programmable |
|
Optional self-tracking V-guide is thermally welded to the carcass of the belt |
|
Nylon coated belt carcass to reduce friction and minimize noise |
|
|
Ability to run multiple bands of belting on one conveyor |
|
Timing belts are steel or Kevlar reinforced to offer high load carrying capacities, reduce stretch and allow for precision cleat or profile placement |
|
Low profile conveyor - only 3" high |
|
Less than 5-minute belt change without removal of drive package or guide rails |
|
Widths up to 18" and lengths up to 24' (Special widths and lengths available) |
|
Heavy duty load carrying capacities |
|
High impact resistant single piece formed powder coated 10 gauge steel frame |
|
Wide variety of application specific belting |
|
Wide variety of sides, guides, mounts, stands, drive packages and controls |
|
